Housebooster (left)

For boosting potable water supplies in a single house
The Housbooster is capable of delivering high flow rates and pressure to a 2 / 3 storey house with two bathrooms and high specification equipment.  For larger houses there are Houseboosters with greater capacity and performance.

Compact design
The Housebooster has a footprint that will fit within a 600mm x 600mm module enclosure, and is 1950mm high.  The Housebooster can be fitted with a full enclosure and front panel as an optional extra (example shown without)

		Requires Adobe Acrobat Reader to view (Download HERE)
<download tip>

The Compact Minibooster is capable of delivering potable water at a high flow rates and pressure, to a small block of flats or a large luxury house with multiple bathrooms.

Compact design
Flatboosters have a footprint of only 1000mm x 1000mm with the control panel mounted elsewhere (or 1000mm x 1200 with the control panel fitted to the front of unit) and is 1950mm high. All access is from the front and above. (example as shown)

		Requires Adobe Acrobat Reader to view (Download HERE)
<download tip>

Plant room space avove ground hard to find or expensive?
Check out the [Harton POD range], the unique below ground mains water pumping station!

Compact Booster (example, right)

The Compact Booster is capable of delivering potable water at high flow rates and pressure, to a medium sized block of flats.

Compact design
The Compact Boosters are purpose-designed to suit site requirements and are particularly compact to minimise floor space occupied.  all access is from the front and minimal clearance is required at the sides and rear.  Overall dimensions are subject to performance requirements, our design team will advise.

		Requires Adobe Acrobat Reader to view (Download HERE)
<download tip>

Plant room space avove ground hard to find or expensive?
Check out the [Harton POD range], the unique below ground mains water pumping station!

Megabooster (example, left)

The top performance range for large developments
Megaboosters are purpose-designed potable water storage and pumping systems for the really high density residential or commercial developments.  Harton technical team is normally closely involved with the client at the design stage to ensure that each system exactly matches technical and space requirements.

Factory pre-assembly minimises and simplifies site work
Megaboosters are delivered to site in management pre-assembled sections, which are then simply reconnected on site to leave the whole assembly ready to use.  Heavy duty welded steel framework unify the tanks and pumps into a single unit.  The GRP storage tank may be divided into compartments if required, and comes with stainless steel internal and external ladders where necessary

For further specifications, download the .pdf from the link below.

		Requires Adobe Acrobat Reader to view (Download HERE)
<download tip>